Product Introduction
*The Surface Of The Bedways Is Supersonic Frequency Hardened And Precision Grinding.
*Gears Precisely Ground To Reduce Noise.
*Spindle Bore 58mm.
*No Need For Change Gear. The Machine Can Turn Kinds Of Metric, Inch, Module And d.p. Threads.
Specification
| TECHNICAL PARAMETERS | |||
| Model | C6241/1000 | ||
| CAPACITY | Max.swing over bed | 410mm | |
| Max.swing over cross slide | 220mm | ||
| Max.swing over gap | 640mm | ||
| Effective length of gap | 165mm | ||
| Center Distance | 1000mm | ||
| Bed Width | 300mm | ||
| HEADSTOCK | Spindle hole | 58mm | |
| Spindle nose | ISO-D6 | ||
| Spindle taper | MT6(1:20) | ||
| Spindle speed(Number) | (12steps)25-2000rpm | ||
| FEEDS AND THREADS | Max.travel of top slide | 128mm | |
| Max.travel of cross slide | 285mm | ||
| Max.size of toolshank | 25*25m2 | ||
| Longitudinal metric feeds | 42kinds 0.031-1.7mm/rev | ||
| Longitudinal inch feeds | 42kinds 0.0011-0.0633inch/rev | ||
| Cross metric feeds | 42kinds 0.014-0.784mm/rev | ||
| Cross inch feeds | 42kinds 0.00033-0.01837inch/rev | ||
| Metric threads range | 41kinds 0.1-14mm | ||
| Inch threads range | 60kinds 2-112T.P.I | ||
| Moudle threads range | 34kinds 0.1-7M.P | ||
| Diametral threads range | 50kinds 4-112D.P | ||
| TAILSTOCK | Dia.of tailstock sleeve | 60mm | |
| Taper of tailstock sleeve | MT4 | ||
| Max.travel of tailstock | 130mm | ||
| MOTOR | Main drive motor | 5.5KW | |
| Coolant pump motor | 90W | ||
| PACKING | L*W*H(1000mm) | 245*115*175cm | |
| WEIGHT | N.W/G.W(1000mm) | 1600/1900kgs | |
Free Equipped
PART(1):INSTALL ON THE LATHE
-Work lamp
-Coolant system
-Thread-cutting dial
-3-jaw chuck(Φ200mm)
-Full-length splash guard
-Steady rest & follow rest
-Foot brake and brake ribbon
PART(2):INSIDE THE PACKAGE WITH THE LATHE
-Oil gun
-Paddings
-Change gears
-Face plate(350mm)
-4-jaw chuck(Φ250mm)
-One whole set spanner
-Z axis travel marking device
-Dead centre and centre sleeve
-Operation manual
Отзывы
Отзывов пока нет.