Conventional Lathe Machine | 12″x40″ (320x1000mm) 38mm Spindle Bore Benchtop C0632A
Conventional Lathe Machine | 12″x40″ (320x1000mm) 38mm Spindle Bore Benchtop C0632A
Powerful conventional lathe machine for precision manual turning with 330mm swing, 1000mm center distance and 38mm spindle bore. C0632A runs at 70–2000 rpm.
Spécifications du produit
- Rotation au-dessus du lit : 320 mm
- Distance entre les centres : 1000 mm
- Alésage de broche : 38 mm
- Moteur de broche : 1,5 kW
- Type : Manuel
- Poste d'outillage : Poste d'outillage vertical à quatre stations
Présentation et points forts du produit
Le C0632A conventional lathe machine is a compact bench-type manual metal turning lathe designed for maintenance, repair work, technical training, and light-duty precision machining. With a 320 mm swing over bed, 1000 mm distance between centers, et 38 mm spindle bore, it provides a practical solution for workshops machining small shafts, bushings, sleeves, and custom metal components.
The C0632A features a 1.5 kW main motor, 70–2000 rpm spindle speed range, D1-4 spindle nose, MT5 spindle taper, and a vertical four-station tool post. Its compact manual configuration makes it suitable for repair shops, equipment service departments, technical schools, and small mechanical workshops.
Spécifications techniques
| Modèle | C0632A × 1000 |
| Lit suspendu | 320 mm (13″) |
| Hauteur centrale | 166 mm (6-1/2″) |
| Distance entre les centres | 1000 mm (40″) |
| Largeur du lit | 187 mm (7-3/8″) |
| Alésage de broche | 38 mm (1-1/2″) |
| Nez fuselé | D1-4 |
| Cône de broche | MT5 |
| Spindle Speed Steps | 8 speeds |
| Plage de vitesse de broche | 70–2000 rpm |
| Cross Slide Width | 130 mm |
| Cross Slide Travel | 170 mm |
| Compound Rest Width | 80 mm |
| Compound Rest Travel | 95 mm |
| Leadscrew | 8 TPI or 3 mm pitch |
| Feed Rod Diameter | 19 mm |
| Maximum Tool Section | 16 × 16 mm |
| Filetage en pouces | 34 kinds, 4–56 TPI |
| Metric / Module Threads | 26 kinds, 0.4–7 MP |
| Longitudinal Feeds – Inch | 32 kinds, 0.002–0.548″/rev |
| Longitudinal Feeds – Metric | 32 kinds, 0.052–0.392 mm/rev |
| Cross Feeds – Inch | 32 kinds, 0.007–0.0187″/rev |
| Cross Feeds – Metric | 32 kinds, 0.014–0.380 mm/rev |
| Quill Diameter | 32 mm (1-1/4″) |
| Quill Travel | 100 mm |
| Quill Taper | MT3 |
| Puissance du moteur principal | 1.5 kW (2 HP) |
| Lathe Length | 1655 mm |
| Hauteur de la machine | 290 mm |
Caractéristiques structurelles et fonctions d'usinage
- 330 mm swing over bed provides practical turning capacity for small and medium-sized workpieces.
- 38 mm spindle bore supports common shafts, bars, sleeves, and maintenance components.
- 1000 mm distance between centers provides sufficient working length for general-purpose manual turning.
- 70–2000 rpm spindle speed range allows flexible cutting and finishing operations.
- D1-4 spindle nose with MT5 spindle taper provides a practical configuration for general workshop machining.
- Vertical four-station tool post allows convenient tool changes during repetitive turning operations.
- 32 longitudinal feed selections provide flexibility for different machining requirements.
- Multiple thread-cutting capabilities support both inch and metric/module thread applications.
- Compact bench-type design is suitable for workshops with limited floor space and applications requiring a practical manual lathe.
- 1.5 kW main motor provides suitable power for light-duty and precision metal turning.
Applications d'usinage typiques
Réparation et entretien
Ideal for repair shops and maintenance departments machining replacement shafts, bushings, sleeves, pins, and other metal components.
Small Shaft Turning
The 38 mm spindle bore and 1000 mm center distance support common shaft and bar turning operations.
Workshop Machining
A compact manual lathe solution for general-purpose machining in small manufacturing and mechanical workshops.
Technical Training
The straightforward manual configuration makes the C0632A suitable for technical schools, training centers, and operator education.
Équipement standard, assurance qualité et assistance technique
L'équipement standard comprend :
- mandrin à 3 mors
- Coolant system
- Frein à pied
- Work light
- Oil tray
- Repos stable
- Suivez le reste
- Rear panel
ZCIT provides technical support and pre-shipment quality control for conventional lathe machines. Machine safety and guarding should be evaluated according to the working environment and applicable regulations. For general machine-guarding guidance, refer to
Exigences de l'OSHA en matière de protection des machines.
For machine selection, configuration, production lead time, shipping, and technical requirements, contact ZCIT for a suitable conventional lathe solution.
Related Conventional Lathe Machines
Explorez davantage
conventional lathe machines
from ZCIT, or compare the C0632A with other manual turning solutions:
C6241 Conventional Lathe Machine
– 410 mm swing and 58 mm spindle bore for higher-capacity general turning.
Tour conventionnel C6246
– larger swing and longer center distance for general metal turning.
C6251 Conventional Lathe Machine
– larger spindle bore and higher machining capacity.
CW6163 Horizontal Lathe Machine
– larger horizontal turning solution for demanding machining applications.
Looking for a Compact Bench-Type Lathe Machine?
The ZCIT C0632A is a practical conventional lathe machine for repair, maintenance, technical training, and general-purpose metal turning. Contact our team for specifications, configuration options, pricing, and export support.
FAQ
1. Contrôle et inspection de la qualité
Q : Comment garantissez-vous la précision des machines avant l'expédition ?
A : Chaque machine est soumise à un étalonnage par interféromètre laser, à un essai de découpe et à un test de fonctionnement continu de 72 heures. Des rapports d'inspection complets et des vidéos de pré-expédition sont fournis avant l'envoi.
2. Conditions de paiement
Q : Quelles sont vos conditions de paiement acceptées ?
A: Nous acceptons les virements télégraphiques (T/T). Les conditions de paiement standard prévoient un acompte de 30% à la confirmation de la commande, le solde de 70% étant dû avant l'expédition.
3. Délai de livraison
Q : Quel est le délai de livraison estimé ?
A: Les modèles standard sont expédiés sous 20 à 30 jours après réception de l'acompte. Les machines personnalisées ou les configurations spéciales nécessitent un délai de 30 à 60 jours selon les spécifications.
Produits associés
Produits similaires
Machines à tours conventionnellesTour conventionnel | 500 × 1500 mm (20″ × 60″) Alésage de broche 80 mm CD6250C
- Machines à tours conventionnelles
Tour horizontal robuste | 630 x 2000 mm (25″ x 80″) | Alésage de broche : 105 mm | CW6163
