Conventional Lathe Machine | 12″x40″ (330x1000mm) 38mm Spindle Bore Benchtop C0632A
Conventional Lathe Machine | 12″x40″ (330x1000mm) 38mm Spindle Bore Benchtop C0632A
Powerful conventional lathe machine for precision manual turning with 330mm swing, 1000mm center distance and 38mm spindle bore. C0632A runs at 70–2000 rpm.
مواصفات المنتج
- تأرجح فوق السرير: 320 مم
- المسافة بين المركزين: 1000 مم
- قطر تجويف المغزل: 38 مم
- محرك المغزل: 1.5 كيلو واط
- النوع: يدوي
- حامل أدوات: حامل أدوات رأسي بأربعة محطات
Product Overview & Highlights
ال C0632A conventional lathe machine is a compact bench-type manual metal turning lathe designed for maintenance, repair work, technical training, and light-duty precision machining. With a 330 mm swing over bed, 1000 mm distance between centers, ، و 38 mm spindle bore, it provides a practical solution for workshops machining small shafts, bushings, sleeves, and custom metal components.
The C0632A features a 1.5 kW main motor, 70–2000 rpm spindle speed range, D1-4 spindle nose, MT5 spindle taper, and a vertical four-station tool post. Its compact manual configuration makes it suitable for repair shops, equipment service departments, technical schools, and small mechanical workshops.
Technical Specifications
| نموذج | C0632A × 1000 |
| Swing Over Bed | 330 mm (13″) |
| ارتفاع المنتصف | 166 mm (6-1/2″) |
| المسافة بين المراكز | 1000 mm (40″) |
| عرض السرير | 187 mm (7-3/8″) |
| تجويف المغزل | 38 mm (1-1/2″) |
| طرف مغزلي | D1-4 |
| Spindle Taper | MT5 |
| Spindle Speed Steps | 8 speeds |
| Spindle Speed Range | 70–2000 rpm |
| Cross Slide Width | 130 mm |
| Cross Slide Travel | 170 mm |
| Compound Rest Width | 80 mm |
| Compound Rest Travel | 95 mm |
| Leadscrew | 8 TPI or 3 mm pitch |
| Feed Rod Diameter | 19 mm |
| Maximum Tool Section | 16 × 16 mm |
| Inch Threads | 34 kinds, 4–56 TPI |
| Metric / Module Threads | 26 kinds, 0.4–7 MP |
| Longitudinal Feeds – Inch | 32 kinds, 0.002–0.548″/rev |
| Longitudinal Feeds – Metric | 32 kinds, 0.052–0.392 mm/rev |
| Cross Feeds – Inch | 32 kinds, 0.007–0.0187″/rev |
| Cross Feeds – Metric | 32 kinds, 0.014–0.380 mm/rev |
| Quill Diameter | 32 mm (1-1/4″) |
| Quill Travel | 100 مم |
| Quill Taper | MT3 |
| Main Motor Power | 1.5 kW (2 HP) |
| Lathe Length | 1655 mm |
| Machine Height | 290 mm |
Structural Features & Machining Functions
- 330 mm swing over bed provides practical turning capacity for small and medium-sized workpieces.
- 38 mm spindle bore supports common shafts, bars, sleeves, and maintenance components.
- 1000 mm distance between centers provides sufficient working length for general-purpose manual turning.
- 70–2000 rpm spindle speed range allows flexible cutting and finishing operations.
- D1-4 spindle nose with MT5 spindle taper provides a practical configuration for general workshop machining.
- Vertical four-station tool post allows convenient tool changes during repetitive turning operations.
- 32 longitudinal feed selections provide flexibility for different machining requirements.
- Multiple thread-cutting capabilities support both inch and metric/module thread applications.
- Compact bench-type design is suitable for workshops with limited floor space and applications requiring a practical manual lathe.
- 1.5 kW main motor provides suitable power for light-duty and precision metal turning.
Typical Machining Applications
Repair & Maintenance
Ideal for repair shops and maintenance departments machining replacement shafts, bushings, sleeves, pins, and other metal components.
Small Shaft Turning
The 38 mm spindle bore and 1000 mm center distance support common shaft and bar turning operations.
Workshop Machining
A compact manual lathe solution for general-purpose machining in small manufacturing and mechanical workshops.
Technical Training
The straightforward manual configuration makes the C0632A suitable for technical schools, training centers, and operator education.
Standard Equipment, Quality Assurance & Technical Support
Standard equipment includes:
- ظرف ثلاثي الفك
- Coolant system
- Foot brake
- Work light
- Oil tray
- راحة تامة
- اتبع الباقي
- Rear panel
ZCIT provides technical support and pre-shipment quality control for conventional lathe machines. Machine safety and guarding should be evaluated according to the working environment and applicable regulations. For general machine-guarding guidance, refer to
OSHA machine guarding requirements.
For machine selection, configuration, production lead time, shipping, and technical requirements, contact ZCIT for a suitable conventional lathe solution.
Related Conventional Lathe Machines
Explore more
conventional lathe machines
from ZCIT, or compare the C0632A with other manual turning solutions:
C6241 Conventional Lathe Machine
– 410 mm swing and 58 mm spindle bore for higher-capacity general turning.
ماكينة الخراطة التقليدية C6246
– larger swing and longer center distance for general metal turning.
C6251 Conventional Lathe Machine
– larger spindle bore and higher machining capacity.
CW6163 Horizontal Lathe Machine
– larger horizontal turning solution for demanding machining applications.
Looking for a Compact Bench-Type Lathe Machine?
The ZCIT C0632A is a practical conventional lathe machine for repair, maintenance, technical training, and general-purpose metal turning. Contact our team for specifications, configuration options, pricing, and export support.
التعليمات
1. Quality Control & Inspection
Q: How do you ensure machine precision before shipment?
A: Every machine undergoes laser interferometer calibration, sample trial cutting, and a 72-hour continuous operation test. Full inspection reports and pre-shipment videos are provided before dispatch.
2. Payment Terms
Q: What are your accepted payment terms?
A: We accept T/T (Telegraphic Transfer). Standard payment terms are a 30% deposit upon order confirmation, with the remaining 70% balance due prior to shipment.
3. Lead Time & Delivery
Q: What is the estimated lead time for delivery?
A: Standard models are shipped within 20 to 30 days after deposit receipt. Customized machines or special configurations take 30 to 60 days depending on specs.
