Product Introduction
Le C6266E Conventional Lathe Machine is a high-performance, heavy-duty lathe designed for large-scale machining of complex workpieces. With a 26″ (660 mm) swing over the bed et un center distance of 80″ (2000 mm), this lathe can accommodate large and heavy workpieces, such as shafts, flanges, and large rings.
Equipped with a 105mm spindle bore, the C6266E allows for machining of larger diameter parts with ease and precision. The lathe features a supersonic frequency hardened bedway and precision-ground gears, ensuring smooth operation and long-term accuracy even during heavy-duty cutting operations. The robust construction is ideal for demanding environments where precision and durability are required
Spécification
| TECHNICAL PARAMETERS | |||
| Model | C6266E/2000 | ||
| CAPACITY | Max.swing over bed | 660mm | |
| Max.swing over cross slide | 455mm | ||
| Max.swing over gap | 885mm | ||
| Effective length of gap | 200mm | ||
| Center Distance | 2000mm | ||
| Bed Width | 350mm | ||
| HEADSTOCK | Spindle hole | 105mm | |
| Spindle nose | ISO-D8 | ||
| Spindle taper | Metric 113mm(1:20) | ||
| Spindle speed(Number) | (12steps)25-1500rpm | ||
| FEEDS AND THREADS | Max.travel of top slide | 130mm | |
| Max.travel of cross slide | 341mm | ||
| Max.size of toolshank | 25*25m2 | ||
| Longitudinal metric feeds | 35kinds 0.059-1.646mm/rev | ||
| Longitudinal inch feeds | 35kinds 0.0022-0.0612inch/rev | ||
| Cross metric feeds | 35kinds 0.020-0.573mm/rev | ||
| Cross inch feeds | 35kinds 0.00048-0.01354inch/rev | ||
| Metric threads range | 47kinds 0.2-14mm | ||
| Inch threads range | 60kinds 2-112T.P.I | ||
| Moudle threads range | 39kinds 0.1-7M.P | ||
| Diametral threads range | 50kinds 4-112D.P | ||
| TAILSTOCK | Dia.of tailstock sleeve | 75mm | |
| Taper of tailstock sleeve | MT5 | ||
| Max.travel of tailstock | 180mm | ||
| MOTOR | Main drive motor | 7.5KW | |
| Coolant pump motor | 90W | ||
| PACKING | L*W*H(2000mm) | 345*115*185cm | |
| WEIGHT | N.W/G.W(2000mm) | 2700/3100kgs | |
Équipement gratuit
PART(1):INSTALL ON THE LATHE
-Work lamp
-Coolant system
-Thread-cutting dial
-3-jaw chuck(Φ315mm)
-Full-length splash guard
-Steady rest & follow rest
-Foot brake and brake ribbon
PART(2):INSIDE THE PACKAGE WITH THE LATHE
-Oil gun
-Paddings
-Change gears
-Face plate(450mm)
-4-jaw chuck(Φ400mm)
-One whole set spanner
-Z axis travel marking device
-Dead centre and centre sleeve
-Operation manual
Optional Accessory
-Drive plate
-Rapid travel
-Live centre(MT4)
-Drill chuck set(MT4)
-Taper cutting function
-2axis Digital readouts(SINO)
-3axis Digital readouts(SINO)
-Italy type Quick change tool post
-USA type Quick change tool post
-Europe type Quick change tool post
-CE-conformity(Chuck guard, Toolpost guard and leadscrew guard)
-Cutting tool holders set(7pcs or 9pcs)
Avis
Il n’y a pas encore d’avis.