Torno horizontal | 30″x120″ (800x3000 mm) CW6180
Torno horizontal | 30″x120″ (800x3000 mm) CW6180
Powerful heavy-duty horizontal lathe machine with 800mm swing, 3000mm center distance and 105mm spindle bore. CW6180 is designed for large shafts and heavy metal turning.
Especificaciones del producto
- Giro sobre la cama: 800 mm
- Distancia entre centros: 2000 mm
- Diámetro del husillo: 105 mm
- Motor del husillo: 11 kW
- Portaherramientas: Portaherramientas vertical de cuatro estaciones
- Voltage: 3PH 380V/50HZ or 220V 60hz
Descripción general y características destacadas del producto
El torno horizontal CW6180 is a heavy-duty manual turning lathe designed for large-diameter and long workpieces requiring high rigidity, stable cutting performance, and reliable machining capacity. With an 800 mm swing over bed, 3000 mm distance between centers, y 105 mm spindle bore, it is suitable for machining large shafts, cylinders, flanges, rollers, and heavy mechanical components.
The CW6180 features a 550 mm wide bed, 11 kW main motor, vertical four-station tool post, and a maximum workpiece load of approximately 3 tons. Its rigid bed structure, large spindle assembly, and wide feed range provide stable performance for heavy-duty metal turning, threading, and industrial repair applications.
Especificaciones técnicas
| Modelo | CW6180 |
| Columpio sobre la cama | 800 mm (30″) |
| Maximum Turning Diameter Inside Saddle | 1000 mm |
| Maximum Turning Diameter Over Transverse Slide | 480 mm |
| Distancia entre centros | 3000 mm (120″) |
| Ancho de la cama | 550 mm |
| Diámetro del husillo | 105 mm |
| Optional Spindle Bore | 130 mm |
| Cono del husillo | Ø120 mm, Taper 1:16 |
| Rango de velocidad del husillo | 5.4–720 rpm |
| Roscas métricas | 50 kinds, 1–240 mm |
| Roscas en pulgadas | 26 kinds, 1–14 TPI |
| Hilos del módulo | 53 kinds, 0.5–120 mm |
| Diametral Pitch Threads | 24 kinds, 1–28 DP |
| Longitudinal Feed Range | 0.05–24.3 mm/rev, 64 kinds |
| Micro Feed Range | 0.05–0.912 mm/rev |
| Lateral / Longitudinal Feed Ratio | 1/2 |
| Rapid Saddle Traverse | 4000 mm/min |
| Maximum Cross Slide Travel | 420 mm |
| Maximum Compound Rest Travel | 200 mm |
| Tool Section | 32 × 32 mm |
| Tailstock Sleeve Diameter | 100 mm |
| Tailstock Taper | Morse No. 6 |
| Tailstock Sleeve Travel | 240 mm |
| Poste de herramientas | Vertical Four-Station Tool Post |
| Potencia del motor principal | 11 kW |
| Fast Feed Motor | 1.1 kW |
| Maximum Workpiece Load | 3 tons |
| Optional Bed Width | 600 mm |
Características estructurales y funciones de mecanizado
- 800 mm swing over bed provides large turning capacity for oversized shafts, cylinders, flanges, rollers, and other large-diameter workpieces.
- 3000 mm distance between centers supports long workpieces and extended shaft machining operations.
- 550 mm wide bed provides high structural rigidity and helps reduce vibration during heavy cutting operations.
- 105 mm spindle bore allows larger-diameter bars and shafts to pass through the spindle, with a 130 mm optional configuration available.
- 11 kW main motor provides strong power for heavy-duty turning and demanding metal machining applications.
- Vertical four-station tool post supports convenient tool changes for turning, facing, boring, and other machining operations.
- Wide feed range with 64 longitudinal feed selections provides flexibility for roughing, finishing, and threading operations.
- Multiple thread-cutting capabilities support metric, inch, module, and diametral pitch threads.
- Large-capacity tailstock with 100 mm sleeve diameter and Morse No. 6 taper provides stable support for long and heavy workpieces.
- Heavy-duty horizontal lathe structure is designed for stable machining performance in industrial production, repair, and maintenance environments.
Aplicaciones típicas de mecanizado
Mecanizado de ejes grandes
Suitable for machining long shafts, transmission components, axles, rollers, and other large cylindrical workpieces.
Heavy Mechanical Components
Designed for large mechanical components requiring high rigidity, stable cutting performance, and reliable dimensional control.
Flange & Disc Turning
The large swing capacity supports turning of heavy flanges, discs, rings, and other large-diameter rotating components.
Industrial Repair & Maintenance
Suitable for industrial machinery repair, maintenance departments, power transmission components, and large replacement parts.
Equipamiento estándar, garantía de calidad y soporte técnico.
Standard configuration and available equipment include:
- Vertical four-station tool post
- Manual chuck configuration
- 105 mm spindle bore
- 130 mm optional spindle bore
- 550 mm wide bed
- 600 mm optional bed width
- Large-capacity tailstock
- Heavy-duty horizontal lathe bed structure
- Fast feed system
- Workpiece support equipment according to machine configuration
ZCIT provides technical support and pre-shipment quality control for heavy-duty horizontal lathe machines. Machine safety and guarding should be evaluated according to the working environment and applicable regulations. For general machine-guarding guidance, refer to
Requisitos de protección de maquinaria de OSHA.
For machine selection, configuration, spindle options, production lead time, shipping, and technical requirements, contact ZCIT for a suitable heavy-duty horizontal lathe solution.
Related Horizontal & Conventional Lathe Machines
Explora más
conventional lathe machines
from ZCIT, or compare the CW6180 with other turning solutions:
CW6163 Horizontal Lathe Machine
– a heavy-duty horizontal turning solution with 105 mm spindle bore.
CQ6280C Heavy-Duty Conventional Lathe Machine
– 800 mm swing and 105 mm spindle bore for large workpieces.
CS6266C Heavy-Duty Conventional Lathe Machine
– 660 mm swing and 105 mm spindle bore for heavy-duty turning.
C6241 Conventional Lathe Machine
– a more compact conventional lathe for general-purpose metal turning.
Looking for a Heavy-Duty Horizontal Lathe Machine?
The ZCIT CW6180 is designed for large-diameter and long workpieces requiring high rigidity and heavy-duty manual turning capacity. Contact our team for machine configuration, spindle options, pricing, and export support.
Preguntas frecuentes
1. Control e inspección de calidad
P: ¿Cómo garantizan la precisión de la máquina antes del envío?
A: Cada máquina se somete a calibración mediante interferómetro láser, prueba de corte de muestra y una prueba de funcionamiento continuo de 72 horas. Se proporcionan informes de inspección completos y vídeos previos al envío.
2. Condiciones de pago
P: ¿Cuáles son sus condiciones de pago aceptadas?
A: Aceptamos transferencias telegráficas (T/T). Las condiciones de pago estándar son un depósito de 30% al confirmar el pedido, y el saldo restante de 70% debe abonarse antes del envío.
3. Plazo de entrega y envío
P: ¿Cuál es el plazo de entrega estimado?
R: Los modelos estándar se envían entre 20 y 30 días después de recibir el depósito. Las máquinas personalizadas o con configuraciones especiales tardan entre 30 y 60 días, según las especificaciones.
